e-learning

Well Completion

After a well is drilled, there is still much that needs to be done before oil and gas can begin to flow to the surface.

DEMO: Introduction to Petroleum

Module content:

  • Basic steps of well completion
  • Considerations in well completion design
  • Common types of equipment and mechanisms used including:
    • Tubular goods
    • Packers sleeves
    • Production liners
    • Wellhead and trees
    • Subsurface safety valves
  • Common types of lower well completions:
    • Open hole
    • Cased and perforated
    • Open hole with liner
  • Perforating options
  • Considerations for lower completions at the sandface
  • Special completions:
    • Horizontal wells with multistage hydraulic fracturing
    • Wells with extended reach drilling
    • Intelligent completions
    • Multiple completions

Module content:

  • Lesson 1—Well Completion Overview
  • Lesson 2—Well Completion Components
  • Lesson 3—Lower Completions
  • Lesson 4—Special Completions

In order to successfully complete this module you will be required to:

  • Go through all the lessons in the module.
  • Complete the practice items.
  • Complete the module quiz with a passing grade of 70%. You will have 2 chances to complete the quiz.

At the end, you will receive a Certificate of Completion. It should take you approximately 45-60 minutes to complete this module.

For multiple licenses or to use the material in training, please contact us at 800.687.4132 or 512.471.5940 or by sending an email to info@petex.utexas.edu.

Catalog # License Price  
93.M0110 12 Months $95.00